Disponemos de un amplio surtido de equipamiento usado a precios reducidos.

Marca: DVA10S
Modelo: 4S
Descripcion: Distribuidor / amplificador de audio y video. (1 entrada a 10 salidas)
Audio: Entrada – stereo balanceado Salida stereo des balanceado
Video: BNC

Marca: ADC
Modelo: 990226
Descripcion: Patchera de Audio

Marca: ADC
Modelo: PPE2224-75N-BK
Descripcion: Patchera de Video

Marca: CAVENA
Modelo: ST938E
Descripcion: Subtitulador Scan Tittling – SDI

Marca: CAVENDISH
Modelo: VS-628-06

Marca: CAVENDISH
Modelo: VS-628-09
Descripcion: Control y monitor de audio

Marca: CAVENDISH
Modelo: VS-628-01
Descripcion: Control de Monitoreo

Marca: CAVENDISH
Modelo: VS-628-02
Descripcion: Mezclador de Audio

Marca: CAVENDISH
Modelo: VP-710-01
Descripcion: Mezclador de Audio

Marca: ELLAN
Modelo: Rack
Descripcion: Rack de 2mts de alto, color gris oscuro

Marca: GRASS VALLEY
Modelo: 20-TEN
Descripcion: Matriz A/V, With 20-Ten-SA Stereo audio frame, 420 BPS panels

Marca: HAMLET
Modelo: 302WVR
Descripcion: Monitor de señal de video

Marca: JVC
Modelo: RM-G820E
Descripcion: Unidad de Edición
Serial (RS-422) interface w/switcher control
Variable motion control
99 event memory
4 GPI
Pre-Read
2 machine only (no A/B roll)

Marca: JVC
Modelo: RMG22U
Descripcion: Unidad de control remoto de TBC

Marca: JVC
Modelo: RMG77U
Descripcion: Serial Remote Controler for Duplicator
Functions that can be controlled with the RM-G77U:
PLAY/STOP/REC/FF/REW REC-PAUSE/PAUSE/EJECT/Hi-Fi ON/OFF

Marca: LEITCH
Modelo: FR683
Descripcion: El FR-683 Mounting Frames acepta cualquier tipo de amplificador de video de la serie 680 en cualquiera de sus 4 slot. Incorpora conectores BNC, solucionando y simplificando los problemas de distribucion, procesamiento, equalizacion retardos, etc. This equipment is renowned for its high quality and reliability. Design considerations ensure compatibility with both earlier and future developments.

Marca: LEITCH
Modelo: VDA683
Descripcion: The VDA-683 is a general purpose distribution amplifier with excellent linearity and gain stability for solving common mode errors. It can handle anything from nominally 0.7Vp-p non-composite video to 2Vp-p subcarrier. Low power consumption and high temperature stability make this a very reliable, inexpensive distribution amplifier for analog composite/component and analog HDTV installations. The VDA-683 provides a differential input when equalization and clamping are not required. Although normally used as a unity gain amplifier, a variable gain control on the module front edge with a range from -3dB to +3dB allows compensation for non-standard input levels or line losses.

Marca: LEITCH
Modelo: FR883
Descripcion: The FR-883 Mounting Frame accepts any type of the 880 Series Audio Distribution Amplifiers in any slot. The modular concept facilitates system design. Isolation between modules in the mounting frame is better than 100 dB over the entire audio frequency spectrum. Design considerations ensure compatibility with both earlier and future developments. The 1RU FR-883 mounting frame comes complete with one 884PS power supply, a set of forty Acon plug-in connectors, and accepts any mix of up to four 880 Series amplifiers.

Marca: LEITCH
Modelo: ASD880
Descripcion: The ASD-880-600 stereo audio distribution amplifier is designed to meet the most demanding requirements of broadcast facilities, television post-production, and recording studios. This excellent amplifier provides two high performance channels with four balanced outputs per channel. Excellent output isolation and interchannel crosstalk is assured by the use of individual drivers for each output.
Features: 1 in 4 out stereo
Compatible with all Leitch audio DA frames
600 ohms output impedance
Very low noise (100 dB S/N)
Excellent interchannel crosstalk (>95 dB)

Marca: LEITCH
Modelo: VIA 32
(32×16 Analog Video Routing Switcher – 32×16 Dual Channel Audio Routing Switcher)
Descripcion: The analog video VIA32 offers high bandwidth of 100MHz which makes it ideal for NTSC, PAL, SECAM, High Resolution RGB graphics and DS3 switching. For component analog applications, three frames can be linked together using the XY Control System. Frames can be configured as 32×16 with plug-in expansion to 32×32. Expansion to 32×48 and 32×64 video is accomplished by using the EX16-1x2V external expansion frames.
Features:
Video Input Coupling: DC
Video Output Return Loss: 45dB at 5MHz; 35dB at 20MHz; 18dB at 100MHz
Video Output Gain Scatter: ±0.1dB
Video Output Phase Scatter: Input to Input ±1.0° at 5MHz
Video Output DC Offset: ±50mv

Marca: MAGNA SCIENTIFIC
Modelo: TBC PHOENIX
Descripcion: TBC entrada y salida por video compuesto

Marca: ROBOT
Modelo: AMPLIMAG
Descripcion: Estabilizador de tensión Trifásico o Monofásico 380V – 220V – 110V 50KVA – Regulacion +/- 20% sobre la tension de entrada.
(con control electronico)

Marca: TEKTRONIX
Modelo: 1741A
Descripcion: Waveform y Vector (4ch o componentes, RGB)

Marca: VIDEOTEK
Modelo: VTM-100
Descripcion: Monitor de señal de video

Marca: YAMAHA
Modelo: MX12/4
Descripcion: Mixer audio 12 canales